Product Details

350ml Large Capacity Automatic Hand Touchless Soap Dispenser

The automatic sensor soap dispenser is a touch-free dispensing device designed specifically for kitchens, bathrooms and public spaces. Unlike a standard push-button soap dispenser, it uses infrared sensors: simply hold your hand over the sensor and the soap dispenses automatically. There is no need to press a pump or touch a button, thereby preventing cross-contamination.

Advantages

• 0.25-second rapid foam generation
  No pressing, no contact – infrared sensor
• RGB three-colour LED indicator
  Touch-sensitive controls with intuitive, colourful LED indicators for status changes
• 3 preset foam output levels
  Three levels to suit your needs, for optimal and economical foam output
• Fine, gentle foam
  Easily penetrates fine pores to effectively remove dirt and oil from the skin
• Large 350ml transparent water tank
  Compact and lightweight, taking up minimal space; fixed volume ensures economical use
• Type-C fast charging
  1200mAh high-capacity battery, low-power standby for long-lasting battery life, avoiding frequent charging
• 30° angled nozzle for foam that doesn’t stick to walls
  Ergonomic and scientific design with a 30° angled foam dispenser for precision and no waste
• One-touch smart cleaning for easy maintenance
  Press and hold for 5 seconds; the blue and green lights will flash alternately to enter the automatic internal cleaning mode
• Wall-mounted or tabletop use – no space restrictions
  Mark-free design; does not damage walls, easy to store and space-saving

Operation Steps

• Unscrew the bottle and add hand sanitizer
• Add 1:5-10 water and shake evenly
• Press and hold to power on,and then press to switch gears
• You can sense the bubble by approaching it with your hand

Packaging dimensions 
The product packaging details are as follows

Customer Service

Place your brand where guests can see it every day, turning every hand wash into a brand exposure opportunity. Our automatic sensor soap dispensers can be fully customised—with screen-printed logos and bespoke packaging—making them ideal for hotels, restaurants, office buildings and corporate gifts.

FAQ

Q1: What is an automatic sensor soap dispenser? How does it differ from a standard push‑button soap dispenser?
A1: An automatic sensor soap dispenser is a smart soap dispenser. It uses infrared sensor technology to dispense soap contact‑free.
Key differences from standard push‑button soap dispensers:

Conceptual understanding: The automatic sensor soap dispenser is a smart hygiene tool that “dispenses soap as soon as you reach out, without pressing, squeezing or cross‑contamination.”

Q2: What is the principle behind infrared sensing? What is the sensing range?
A2: It utilises the principle of infrared reflection. Simply covering the sensing area with your hand triggers the dispenser.
How it works:

• The sensor continuously emits infrared light.

• When a hand enters the sensing area, the infrared light is reflected back.

• The receiver detects the signal — triggering the motor or pump to dispense liquid.
  Sensing range: Typically 2‑7 cm — with slight variations between brands.

• If the distance is too close — below 1 cm — the sensor may be unresponsive.

• If the distance is too far — above 8 cm — false triggering may occur.
  Points to note:

• Dark‑coloured gloves may affect sensor sensitivity.

• Direct exposure to strong light — such as direct sunlight — may cause the sensor to malfunction.

Q3: What is the dispensing volume per use? Can it be adjusted?
A3: The standard dispensing volume is approximately 0.5‑2 ml per use. It can be adjusted.

Soap‑saving benefits: Compared to push‑button dispensers — approximately 2‑5 ml per person per use — automatic sensor soap dispensers can save 30‑50% on soap usage.

Q4: What liquids can be used in the automatic sensor soap dispenser? Can washing‑up liquid be used?
A4: It can hold a variety of liquids. However, viscosity is a key consideration.

Purchasing advice: If you intend to use washing‑up liquid, choose a model with a larger pump nozzle.

Q5: How do I install and replace the soap solution?
A5: Installation is simple. Follow these steps.
Installation steps:

1. Unscrew the liquid reservoir from the base.

2. Open the cap and pour in the soap solution — do not fill to the brim. Leave 1‑2 cm of space.

3. Insert the suction tube into the bottle and screw the bottle back on tightly.

4. Reattach the bottle to the base of the main unit.
   Replacing the soap solution:

• Pour out the remaining soap solution — or simply add water and shake to rinse.

• Pour in the new soap solution.

• For first‑time use, press the dispenser several times to expel any air from the tube.
  Cleaning the system:

• Empty out any residual liquid.

• Add clean water and shake to rinse.

• Repeat 2‑3 times until clean.

• If the tube is blocked, soak it in warm water.

Q6: Is the automatic sensor soap dispenser waterproof? Can it be used in the bathroom?
A6: Most models have an IPX4 waterproof rating. They can be used in the bathroom but are not recommended for direct exposure to water.

Usage recommendations:

• Avoid rinsing the unit directly with water.

• Wipe dry with a dry cloth if splashed.

• Do not place directly beneath the shower head.

Q7: Do automatic sensor soap dispensers break easily? How should they be maintained?
A7: They will last 2‑3 years with normal use. With proper maintenance, they will last even longer.
Common faults:

• No dispensing: Liquid too thick — pump head blocked — low battery.

• Sensor malfunction: Sensor area dirty — direct exposure to strong light — incorrect hand position.

• Leaking: Bottle not screwed on tightly — sealing ring worn.
  Routine maintenance:

• Clean the reservoir before refilling.

• Wipe the sensor area regularly with a soft cloth.

• Flush the tubing when changing liquid types.

• If not in use for an extended period, empty the liquid and remove the batteries.

Feel free to inquire anytime and lock in your favorite style!