Product Details

Compact Portable Multi-purpose Tyre Inflator Digital Display Rechargeable Air Pump

This digital display air pump is a portable inflation tool designed specifically for car tyres, motorbikes, bicycles and balls. Unlike old-fashioned mechanical gauge pumps, it features an LED display that shows the tyre pressure in real time. Simply set your target pressure, press the switch, and the pump will stop automatically once the preset pressure is reached. No need to crouch down to check the gauge, and no need to worry about over-inflating.

Advantages

• Powerful motor system for lightning-fast inflation – no waiting
  Pure copper motor with airflow boost technology delivers powerful performance, enabling rapid inflation in 10 seconds and significantly increasing inflation speed
• Built-in smart chip for multi-mode, precise pressure measurement
  The high-precision smart chip ensures accurate pressure readings, allowing you to monitor tyre pressure in real time and ensuring safe travel
• High-capacity lithium battery for extended use
  The air pump is equipped with two 1500mAh batteries, providing stable power and a long operating time
• One-Button Tyre Pressure Preset: Stops Automatically When Full for Added Peace of Mind
  You can preset the desired tyre pressure; once the set value is reached, the pump will automatically stop inflating, making it convenient and worry-free
• Stable Voltage for Extended Usage per Charge
  The pump is equipped with carefully selected high-quality lithium batteries, ensuring a stable and long-lasting power supply with a long service life
• 3-layer construction air hose: freeze-resistant, burst-proof and wear-resistant
  High-quality nylon braided air hose, quality proven through testing
• 3-layer construction air hose: freeze-resistant, burst-proof and wear-resistant
  High-quality nylon braided air hose, quality proven through testing
• Compact, portable and easy to store, taking up minimal space
  The air pump is compact and portable, slightly taller than most mobile phones, making it easy to store and pack away
  
  

Suitable scenarios

• Top-up tyre pressure for everyday use – the most common scenario
• Before a long road trip – the final step to ensure a worry-free journey
• Emergency tyre puncture repair – to get you to a garage
• Motorcycles/bicycles/electric scooters – two-wheelers need a top-up too
• Balls and inflatable toys – not just for vehicles
• Emergency lighting and warning lights – a handy aid for changing tyres by the roadside

Packaging dimensions 
The product packaging details are as follows

Customer Service

Print your brand on the tools that car owners carry in their vehicles, turning every tyre inflation into a branding opportunity. Our air pumps can be fully customised—with screen-printed logos, laser-engraved logos, stickers and bespoke packaging—making them ideal for car brands, dealerships and corporate gifts.

FAQ

Q1: How fast is this air pump? How long does it take to inflate a tyre?
A1: It features a 17mm bore cylinder with an airflow rate of 17 L/min. Its inflation speed is excellent compared to similar products.

Parameter explanation: A flow rate of 17 L/min means 17 litres of air can be drawn in or expelled per minute. Combined with a 17mm bore cylinder, this ensures stable inflation efficiency. For everyday top‑up scenarios — from 1.8 bar to 2.3 bar — the process takes approximately 1‑2 minutes. This is perfectly acceptable. Inflating a completely flat tyre takes longer — 4‑6 minutes. If you frequently need to inflate tyres that are completely flat, we recommend checking for punctures or air leaks.

Q2: What does “1800mAh × 2” mean? How many tyres can be inflated on a full charge?
A2: “1800mAh × 2” refers to two 1800mAh lithium batteries connected in series. The total capacity is 1800mAh — 7.4V — approximately 13.3Wh.
Reference for the number of tyres that can be inflated on a single charge:

• Car tyre top‑up — 1.8 bar → 2.3 bar: Can inflate 6‑8 tyres — 3‑4 vehicles.

• Car flat tyre — 0 → 2.5 bar: Can inflate 1 tyre — remaining battery capacity approximately 10‑15%.

• SUV tyre inflation: Can inflate 4‑6 tyres.

• Motorcycles / bicycles: Can inflate more than 10 tyres.
  Practical usage tips:

• Sufficient for everyday inflation needs. There will still be power remaining after inflating 1‑2 vehicles.

• If inflating multiple vehicles or completely flat tyres, it is recommended to maintain a sufficient charge level during use — or to use the unit whilst it is connected to a power source — mains power required.
  Shutdown Logic: The device will automatically shut down for protection when the battery voltage drops below 6V. It cannot be forced to run until completely drained. This is a normal safety mechanism. Please recharge promptly.

Q3: What does an 80W power rating mean? Will it burn out the cigarette lighter socket?
A3: 80W is considered a medium‑to‑high power rating for car air pumps. The wireless model has no adverse effect on the vehicle.

Advantages of the wireless model: This is a wireless model powered by a built‑in lithium battery. It is completely independent of the cigarette lighter socket. It will not blow the cigarette lighter fuse and does not require the vehicle to be started.
Comparison with Wired Models: The 80W wired model requires connection to the cigarette lighter socket. The initial start‑up current may be high. Older vehicles’ cigarette lighter fuses — typically 10‑15A — may not be able to handle it. This unit’s wireless design eliminates this concern.

Q4: How do I use the digital display’s preset function? Is it complicated to operate?
A4: It is very simple — just three steps. It stops automatically when the preset pressure is reached.
Operating steps:

1. Power on: Press and hold the power button for 2 seconds. The screen will light up and display the current tyre pressure — shows 0 when not connected to a valve.

2. Set target tyre pressure: Press the “+” or “‑” buttons to set the target value — typically 2.5 bar for cars. Check the nameplate on the driver’s door frame.

3. Inflation: Screw the nozzle firmly onto the tyre valve. Press the “Start” button to begin inflation.

4. Automatic shutdown: The device will stop automatically once the preset tyre pressure is reached. No need to keep an eye on it.
   Unit switching: Press and hold the “Mode” button to switch between PSI, BAR, and kPa units.
   Common misconception: The real‑time tyre pressure can only be measured when the nozzle is connected. A reading of 0 when not connected is normal — and does not indicate a flat battery.

Q5: How should the air pump be maintained? How can its lifespan be extended?
A5: Proper maintenance can extend its lifespan.

Note: Slight heating during operation is normal. After the overheat protection automatically cuts off the power, allow the unit to cool to room temperature before resuming use.

Feel free to inquire anytime and lock in your favorite style!