Product Details

Outdoor Windproof and Retractable X Stand Banner for School Company

The X-stand is a portable poster stand designed specifically for in-store promotions, trade shows, event signage and temporary displays. Unlike roll-up banners, it does not have a cylindrical base—instead, four legs spread out in an X-shape to support the display. Its structure is so simple that it is instantly understandable, and it is so affordable that everyone can have one.

Product Specifications

Advantages

• White Modular Display Stand
  Connectors with built-in springs; reinforced fibreglass poles
  Featuring ABS connectors and reinforced fibreglass poles, this stand offers exceptional load-bearing capacity. The connectors incorporate a spring mechanism for enhanced structural support.
• Grey Adjustable X-Stand
  Connecting pieces with built-in springs, reinforced carbon fibre poles
  ABS connecting pieces, height-adjustable to accommodate a wider range of poster sizes. The spring design within the connecting pieces provides enhanced support.
• Water-Filled Double-Sided X-Stand
  Water/sand-filled up to 16kg, reinforced fibre poles
  The structure becomes heavier and more stable when filled with water or sand; fabric-covered fibre poles are available upon request.
  Height-adjustable, suitable for a wider range of poster sizes.
• Water-Filled Single-Sided X-Stand
  Water/sand-filled up to 16kg, reinforced fibreglass poles
  The structure becomes heavier and more stable when filled with water or sand; fabric-covered fibreglass poles are available to order. Height-adjustable, suitable for a wider range of poster sizes.
• Chuzhan X-Stand
  ABS connectors, pressure-resistant design
  ABS connectors with reinforced butterfly joints for enhanced pressure resistance. All four poles are reinforced steel, offering superior load-bearing capacity and secure connections.
• New Model X-Stand
  ABS connectors, fibreglass poles
  All four poles are reinforced steel, offering superior load-bearing capacity and ensuring the poster remains taut.
• Outdoor Wind-Resistant X-Stand
  Reinforced Fibreglass, Wide Connectors
  Thickened plastic components ensure robustness and durability; capable of suspending water bags; offers excellent tensile strength and load-bearing capacity.
• Korean-Style Reinforced X-Stand
  ABS Hooks, Reinforced and Thickened
  Enhanced resistance to bending and compression; crafted from premium ABS plastic, reinforced and thickened for superior strength and stability, ensuring connections remain secure.

Packaging dimensions 
The product packaging details are as follows

Customer Service
Place your brand on an advertising space that can be set up in just ten seconds, turning every promotion into a brand exposure opportunity. X-stands can be fully customised—with full-colour printing—making them ideal for in-store promotions, attracting visitors at trade fairs, and street-side stalls.

FAQ

Q1: How do I set up an X‑stand? Do I need any tools?
A1: No tools are required. It takes just 10‑20 seconds.
Set‑up instructions:

1. Remove the poles and connect the top and bottom poles to form an X shape.

2. Align the plastic clips or holes at the four corners of the banner with the ends of the poles.

3. Snap or slide them into place one by one. The banner will tighten naturally.

4. Adjust the angle of the poles to ensure the banner is flat.
   Note: Pay attention to the order of the poles during assembly. Do not fit the top and bottom poles the wrong way round. Check that the graphic is taut after securing it.

Q2: Can the X‑stand be used outdoors?
A2: It can be used outdoors for short periods. However, it must be secured in strong winds.

• No wind / light breeze: ✅ Suitable for use.

• Wind force 3‑4 — leaves rustling: ⚠️ Weights — sandbags, stones — must be added to the base.

• Wind force 5 or above — branches swaying: ❌ Not recommended — prone to tipping over.
  Recommendations for outdoor reinforcement:

• Hang sandbags or weights on the support poles at the base.

• Secure with ground pegs — grass or muddy ground required.

• Avoid placing in draughty areas or alongside high‑traffic walkways.

• Ensure someone is on hand to monitor. Remove immediately if wind strength increases.

Q3: How do I change the graphic on the X‑stand? Can it be reused?
A3: The graphic is replaceable. The poles are reusable.
Graphic attachment methods:

• Plastic clip‑on: Graphics have plastic clips at the four corners. These clip directly onto the ends of the poles.

• Hole‑and‑slot: Graphics have holes at the four corners. These slot onto the ends of the poles.
  Replacement steps:

1. Remove the old graphic.

2. Align the new graphic with the ends of the poles.

3. Simply clip or slot it into place.
   Note: The dimensions of the new graphic must match the stand specifications. Pole structures may vary between brands. It is recommended to purchase graphics from the same brand.

Q4: What scenarios is the X‑stand suitable for?
A4: It has a wide range of applications.

Q5: How should X‑stands be stored and maintained?
A5: Correct storage can extend their lifespan.
Storage steps:

1. Remove the graphic and roll it up for storage — with the graphic facing outwards.

2. Detach the pole connectors and fold the frame into a bundle.

3. Place it in the Oxford cloth bag.
   Care instructions:

• Avoid placing heavy pressure on the poles — to prevent deformation.

• Avoid pulling or tugging violently on the connectors.

• Avoid folding the graphic — it should be rolled up for storage — to prevent creases.

• Store in a dry place — to avoid dampness.
  Cleaning: Wipe the poles with a damp cloth. Gently wipe the graphic with a soft cloth dipped in clean water.

Feel free to inquire anytime and lock in your favorite style!